Process Instrumentation & Engineering Co.
​A brand name for Manufacturing Laboratory and Process Instruments



Muffle Furnace
​Muffle Furnace supplies maximum temperature up to 1000 deg.c. (operating).
​Specifications Include: Heating elements Kanthal or Nicrome, body make: mild steel & surrounded by iron angles, insulation ceramic blanket or height grade refractory insulation bricks. Operating Voltage 220v. A/C or 440v A/c. as per the requirement.
Hot Zone (Inner Chamber size- W x H x D)
4” x 4” x 9”             -----     1.5KW
6” x 6” x 12”           -----     3.0KW
8” x 8” x 12”           -----     4.5KW
12” x 12” 18”             -----     6.5KW
​Temperature Control with Digital temperature controller, with indicator, with air brake semen’s contactor or equivalent ON & OFF type special PID with thyristor drive extra, energy regulator switch is provide to control temperature riseFor Furnace 1400deg.c. Silicon Carbide Rod  operate furnace, please contact us .
Note: Picture, drawing, technical specification may change due to day-to-day development

​Laboratory Chamber Furnace
PIECO-MF-1500 is compact Chamber furnace with hot zone.
High alumina chamber with resistance maximum 1600deg.c., one gas out let pipe & hole provide with back site of furnace for gas out let.
This furnace suitable for all kinds of Ash fusion, Laboratory research, heat treatment of small size sample within maximum heating range 1500deg.c. for a limited period
only.

Technical Specification Include :
Voltage AC 220V Single Phase,50/60 Hz or Three Phase 440 V0lt A/c.
Maximum Working:Temperature1500deg.c.
Continuous Working:Temperature1400deg.c.
Heating Elements Silicon Carbide Elements
Thermocouple Pt/pt-rh13%
Temperature Accuracy Better Than +/- 1%
Temperature Controller Microprocessor Digital contreoller. Drive with Thyristor.
Standard Size  for Hot zone: 12” x 6” x 6”,  16” x 6” x 6”,  16” x 8” x 6”

Note: Picture, drawing, technical specification may change due to day-to-day Development  

​Laboratory Ovens
We offer Lab hot Oven either with or without forced air convection, heating temperature controlled digitally or thermostatic as per the requirement. Heating elements are placed at bottom and at both sides (depends upon the size of oven) for ventilation of air & moisture, one hole will be provide on top. Usefulness of this type of Oven are pre heating, drying, sterilizing, baking, aging etc.
Specifications Include:Temperature range ambient to 300 deg.c. With an accuracy +/- 1% for thermostatic and better than +/- 0.01% for digital temperature indicator and controller. Insulation Glass wool. Inner stainless Steel or Aluminium chamber with outer thick gauge mild steel sheet, finish with epoxy powder coating. This type of HAO is created from double walled construction that is designed to hold in heat and reduce energy output.
(Inner Chamber Size H x W x D)
14” x 12” x 12”   ---    500W
18” x 14” x 16”  ---     700W
24” x 16” x 16”  ---    1000W
36” x 24” x 24”  ---    1500W
48” x 24” x 24”  ---    2000W
Note: Picture, drawing, technical specification may change due to day-to-day Development  

BOD Incubators
Designed for Biological Oxygen Demand and other application like general Incubation, Sperms studies and Enzyme Assays Tests.
Specifications Include:
Double walled inner Aluminium or Stainless Steel on demand, temperature range 5deg.c. to 50deg.c. Air circulation fan complete with long lasting cooling Compressor.Temperature set through Digital Temperature Indicator-cum-Controller, one mounted on top of BOD (PID controller on extra).Removable shelves made of S.S or Aluminum.
(Capacity/ Size inches H x W x D)
Liter 170   -----  34” x 23” x 75”
Liter 300  ------  41” x 24” x 30”
Note: Picture, drawing, technical specification may change due to day-to-day development 

Humidity Chambers
Specifications Include:
Temperature Range 20 deg.c. to 60 deg.c. An accuracy +/- 0.2 deg.c. , Humidity Range 40%RH to 95%RH with an accuracy better than +/- 2% Rh. , Temperature Uniformity +/- 1 deg.c. , Humidity Uniformity 3%RH., Controlling Digital Indicator –Cum- C controller, Construction – Double wall, inner  chamber Stainless Steel with Perforated stainless Steel Tray. Insulation Glass Wool. Air Circulation through motorized Air circulation Blower to maintain proper humidity. Heating elements made of Nicrome wire insulated Stainless steel tube with mica filled. A sealed compressor at the bottom with evaporation coil and condenser. To sensing temperature and humidity a sensor place on inner side of chamber.
Note: Picture, drawing, technical specification may change due to day-to-day development

Hot Plates
​Specifications Include:
Top made of Die Cast, temperature control thermostatically or Digital controller, resistance Nicrome heating elements.
Note: Picture, drawing, technical specification may change due to day-to-day development 

Water Bath
Specifications Include: Outer body made of thick mild steel sheath, inner stainless steel, top cover stainless steel, temperature controller Digital temperature indicator com controller.Standard:  size 12” length x 8” width x 8” height Up Size 24” length x 24” width x 36” height
Note: Picture, drawing, technical specification may change due to day-to-day development

Sequential Timers
Our Sequential Timer suitable for Bag filtering systems to open and closed Air pulsing Solenoid valves.This Sequential timer have 10 channel outputs/to open and closed 10 solenoid valves sequentially.
Specifications Include:Chanel output: Maximum 10.Chanel selectable: Thought jumper pins from 3 to 10 channels.On Time: 20 to 200millisecondOff Time: 2 to 60 second.Output process visible: Through LED.Input Voltage: 220v A/c. as standard also 110v A/c. & 24v. On request.Output Voltage: 220v A/c. as standard also 110v A/c & 24v.On request.Dust Enclosure: Mild Steel Box with Process LED visible window Extra.
Note: Picture, drawing, technical specification may change due to day-to-day development

© 2015 PROCESS INSTRUMENTATION & ENGINEERING CO. ALL RIGHTS RESERVED